Impulse is the ultimate personal multi-task light! Powered by 2 lithium coin cells, the Ultrabright LED burns up to 36 hours and has 3 modes: low, high and flash. With its quick release clip, hat clip, and a range of colors to choose from, you’ll want one for each of your keychains and backpacks! Impulse is UL® Class 1, Division 2 approved.
Impulse is the best individual multi-task light accessible plus it is very UL Class 1, Division 2 approved! Don’t allow its size trick we – the tiny Impulse is jam-packed with big qualities! Powered by 2 lithium coin cells, the Ultrabright LED burns as much as 36 hours plus has 5 electronic switch settings, including low, medium plus significant beam, plus rapidly plus slow blinking methods. With its fast launch, detachable clip, hat clip way, along with a range of translucent hues to select from, you’ll desire 1 for each keychain, backpack, ball cap plus book bag inside the house! Specifications: – Batteries: 2 2016 Lithium Coin Cell – Weight: 14g – UL Rating: Approved – Class I Division 2 Groups A, B, C & D – UL Temp Code: T6
WEIGHT – 14
Princeton Tec’s advertised product weights always include batteries. For many products, battery weight is a large percentage of overall weight. Weight can be significantly reduced by using lithium batteries in lithium-compatible products.
WATERPROOF – LEVEL 1
Level 1 is assigned to lights that offer a degree of water protection equivalent to IPX4 in the International Electrotechnical Commission (IEC) standards. Lights rated at Level 1 are designed for water resistance to splashing and quick dunkings. If a light with a Level 1 rating is accidentally submerged for a longer period of time, the batteries should be removed and the cabinets should be carefully inspected for signs of battery leakage. If water has entered the housing, the light should be dried and batteries replaced.
Underwriters Laboratories Inc. (UL) is an independent, not-for-profit product-safety testing and certification organization. They have been testing products for public safety for more than a century. In order for a product to bear the certified UL Mark, it must pass all UL requirements at their testing facility. Princeton Tec lights that are UL certified fall into one of the following classifications: Class I – Division II – Groups A, B, C, & D or Class II – Division II – Groups F, & G. Refer to the comparison chart in the rear of the catalog. Class I – Division II – Groups A,B,C,& D will be noted with one (+) Class II – Division II – approved for Groups F, & G, will be noted with two (++).
Multiple settings on many of our products give you the flexibility to adjust your light’s brightness and/or beam width to illuminate greater distances or to conserve battery power, depending on your needs.
The light output of Princeton Tec lights is measured in lumens. A lumen is unit derived by the International System of Units (SI) for measuring light output.
FOCUSED WIDE BEAMS
This beam pattern is an excellent choice for multipurpose activities. At close range, focused wide beams simulate normal daylight conditions and allow you to take advantage of your peripheral vision.
1 ULTRABRIGHT LED
The highest quality LED available, the Ultrabright LED is bright and efficient. The smooth, white, wide-beam light emitted by Ultrabright LEDs is ideal for close to mid-range tasks. Ultrabright LEDs are usually grouped together to offer a more powerful light source. Advances currently underway will continue to improve the effi ciency and brightness of Ultrabright LEDs.
Burn time of 36 hours
Compact, water resistant, and self-contained
14g with batteries
Includes 2 2016 Lithium Coin Cell